Parameters
Specifications
Products
Digital PBX with 40+ Call Management Features
Power Fail-transfer
Digital PBX with Live Call Supervision
Features
Allowed and Denied List
Digital PBX restricts calling as per convenience
Least Cost Routing
Ensure least cost incurred for each call
Auto-attendant
Digital PBX effortlessly guides callers to the right extension
3-participant Conference
Connect three participants in a single conference through Digital PBX
Auto Call Back
Digital PBX redials busy or unanswered numbers ensuring prompt and efficient communication
100% Non-blocking
Allow simultaneous handling of multiple calls without any congestion or delays through Digital PBX
Abbreviated Dialing
Digital PBX allows users to assign and dial short codes for frequently called numbers
Dynamic Lock
Dynamically adjust access permissions based on user roles and real-time conditions through Digital PBX
Alternate Number Dialing
Digital PBX enables users to easily dial and connect to alternative phone numbers associated with their contacts
Applications
Architecture Diagrams
Technical Specifications
Digital PBX with 2 Trunks and 6 Analog Extensions
Type of Switching
- PCM/TDM, Digital Switching, 100% Non-blocking
Processor
- 16-bit DSP
Signaling
- Loop Start
Dialing
- DTMF and Pulse (10/20PPS)
Off-Hook AC Impedance
- 600/900/Complex
Off-Hook Current
- 39mA Max.
Loop Limit
- 1800Ω Max (Excluding Telephone)
On-Hook Voltage (Tip/Ring)
- -48V nominal
DTMF detection
- ITU-T Q.24
Return Loss
- >18dB
Longitudinal Balance
- >50dB
Transmission Level Adjust
- Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB
Ringing
- Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz
REN
- 3
CLI Presentation
- DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Protection
- Over Voltage Secondary Protection
Physical Connector
- 2.54mm Push Type connector
CO (Central Office)/Two-Wire Trunk (TWT)
Signaling
- Loop Start
Loop Limit
- 1200Ω
Off-Hook AC Impedance
- 600/900/Complex
Pulse Dialling
- 10/20 PPS
DTMF Dialling and Reception
- ITU-T Q.23 and Q.24
Return Loss
- >18dB
Longitudinal Balance
- >50dB
Transmission Level Adjust
- Tx Gain: -15dB to +10dB. Rx Gain: -15dB to + 10dB
CLI Reception
- DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Call Maturity
- Delay and Polarity Reversal
Protection
- Over Voltage and Over Current Secondary Protection
Physical Connector
- Over Voltage Secondary Protection
Physical Connector
- 2.54mm Push Type connector
Input
- External Adapter 12V@2A for VISIONPRO 206, 308, 412
Dimensions (WxHxD)
- 23.1×16.25×5.5cm (10.5″x11.2″x3.1″)
Unit Weight
- 0.65 kg (1.43lbs)
Shipping Weight
- 3.5 kg (7.7lbs)
Installation
- Wall Mount
Operating Temperature
- 0°C to 45 °C (+32°F to +122°F)
Operating Humidity
- 95% RH, Non-Condensing
Digital PBX with 3 Trunks and 8 Analog Extensions
Parameters
Specifications
Type of Switching
- PCM/TDM, Digital Switching, 100% Non-blocking
Processor
- 16-bit DSP
Signaling
- Loop Start
Dialing
- DTMF and Pulse (10/20PPS)
Off-Hook AC Impedance
- 600/900/Complex
Off-Hook Current
- 39mA Max.
Loop Limit
- 1800Ω Max (Excluding Telephone)
On-Hook Voltage (Tip/Ring)
- -48V nominal
DTMF detection
- ITU-T Q.24
Return Loss
- >18dB
Longitudinal Balance
- >50dB
Transmission Level Adjust
- Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB
Ringing
- Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz
REN
- 3
CLI Presentation
- DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Protection
- Over Voltage Secondary Protection
Physical Connector
- 2.54mm Push Type connector
CO (Central Office)/Two-Wire Trunk (TWT)
Signaling
- Loop Start
Loop Limit
- 1200Ω
Off-Hook AC Impedance
- 600/900/Complex
Pulse Dialling
- 10/20 PPS
DTMF Dialling and Reception
- ITU-T Q.23 and Q.24
Return Loss
- >18dB
Longitudinal Balance
- >50dB
Transmission Level Adjust
- Tx Gain: -15dB to +10dB. Rx Gain: -15dB to + 10dB
CLI Reception
- DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Call Maturity
- Delay and Polarity Reversal
Protection
- Over Voltage and Over Current Secondary Protection
Physical Connector
- Over Voltage Secondary Protection
Physical Connector
- 2.54mm Push Type connector
Input
- External Adapter 12V@2A for VISIONPRO 206, 308, 412
Dimensions (WxHxD)
- 23.1×16.25×5.5cm (10.5″x11.2″x3.1″)
Unit Weight
- 0.65 kg (1.43lbs)
Shipping Weight
- 3.5 kg (7.7lbs)
Installation
- Wall Mount
Operating Temperature
- 0°C to 45 °C (+32°F to +122°F)
Operating Humidity
- 95% RH, Non-Condensing
Digital PBX with 4 Trunks and 12 Analog Extensions
Parameters
Specifications
Type of Switching
- PCM/TDM, Digital Switching, 100% Non-blocking
Processor
- 16-bit DSP
Signaling
- Loop Start
Dialing
- DTMF and Pulse (10/20PPS)
Off-Hook AC Impedance
- 600/900/Complex
Off-Hook Current
- 39mA Max.
Loop Limit
- 1800Ω Max (Excluding Telephone)
On-Hook Voltage (Tip/Ring)
- -48V nominal
DTMF detection
- ITU-T Q.24
Return Loss
- >18dB
Longitudinal Balance
>50dB
Transmission Level Adjust
- Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB
Ringing
- Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz
REN
- 3
CLI Presentation
- DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Protection
- Over Voltage Secondary Protection
Physical Connector
- 2.54mm Push Type connector
CO (Central Office)/Two-Wire Trunk (TWT)
Signaling
- Loop Start
Loop Limit
1200Ω
Off-Hook AC Impedance
- 600/900/Complex
Pulse Dialling
- 10/20 PPS
DTMF Dialling and Reception
- ITU-T Q.23 and Q.24
Return Loss
- >18dB
Longitudinal Balance
- >50dB
Transmission Level Adjust
- Tx Gain: -15dB to +10dB. Rx Gain: -15dB to + 10dB
CLI Reception
- DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Call Maturity
- Delay and Polarity Reversal
Protection
- Over Voltage and Over Current Secondary Protection
Physical Connector
- Over Voltage Secondary Protection
Physical Connector
- 2.54mm Push Type connector
Input
- External Adapter 12V@2A for VISIONPRO 206, 308, 412
Dimensions (WxHxD)
- 23.1×16.25×5.5cm (10.5″x11.2″x3.1″)
Unit Weight
- 0.65 kg (1.43lbs)
Shipping Weight
- 3.5 kg (7.7lbs)
Installation
- Wall Mount
Operating Temperature
- 0°C to 45 °C (+32°F to +122°F)
Operating Humidity
- 95% RH, Non-Condensing
Certifications
Resources
Product Manuals
Product Manuals
Technical Specifications
